This was my last woodworking project for 2016 completed on New Years eve a storage box for sheets of sandpaper. It only took about 2 hours from start to finish. It all made from offcuts left over from recently completed projects.  The carcass is constructed from 12mm construction grade plywood and the shelves are made from 3mm mdf. I used the sheet size of the sandpaper to lay out the internal dimensions an added about 10mm width to accommodate placement in the grooves.

I cut all the groves on the table saw spaced 25mm apart. I cut both sides in one piece to make sure that everything would line up. Top, bottom and back are also from the same material. I glued and nailed the carcass together. The shelves for the sandpaper were a little tricky because the kerf on my saw is 2.8mm and the self material is 3mm. I dealt with this by planing a low angle bevel on each side and sanding.

So thats all for 2016 and my sandpaper has a home for 2017.