In e recent post I mentioned that I received a hand drill as a gift. There are no identifying marks on the drill so I don’t know where it comes from or how old it is. Most likely it is an Australian hand drill although there are a lot of English tools in Australia. What I really enjoyed was taking it apart. Every piece was screwed together which meant that I could completely disassemble it. This is unusual now as most products are made in a way that makes disassembly difficult. A nice feature of the drill is a compartment inside the handle. This would be great to small drill bits.
After a thorough clean and oil I put it all back together. The only real damage was the crank handle which had become bent over time. This was easily fixed at the vice. I decided not to paint the drill. The action of the crank and crown wheel is really smooth.
The chuck tightens very nicely and can hold drill smaller than my modern cordless drill. This is useful for drilling small pilot holes. Particularly in the case of small brass screws which break easily without a pilot hole
I was too impatient to make a video so I put together this collage on Animoto. The following looks pretty good and gives a great look at all the parts that make up this hand drill.
