Following on from part one of this series some of the cleaned up parts required repairing. The baby chairs is constructed from what I think is Tasmanian oak. There wasn't much damage one tenon had broken off a rail. The other parts that are have worn are near the cast iron wheels. I was able to turn a custom dowel to replace the missing tenon. I had thought the tenon was integral to the stretcher so it required drilling to get the bits and pieces out. I even used carving chisels to clean up the stretcher. In the end the repair was successful. The pieces close to the cast iron wheels had splinters missing making the area for the axle holes weakened. I uses a straight cutting router bit and a router table. I was able to carefully remove the damaged parts. I had some old pieces of Tasmanian Oak on hand that allowed me to make small pieces to replace the damaged parts. The new wood was a good match for the original timber on the baby chair. The other major damage to the baby chair was the tray. The original was a piece of plywood which had become delaminated overtime. I did entertain gluing the original plywood back together. In the end I made a new tray from some old plywood I had kept from dismantling old furniture. As with the previous part of this baby chair repair I have a compilation from Animoto.
We inherited this baby chair when our children were small. It has been sitting around the shed for many years being moved everytime we had a cleanup.Like many older pieces of wooden furniture it has been renovated many times. The baby chair was covered in several layers of paint besides the original varnish finish. I don't know much about its provenance other than it being in one family for a long time. I did find a manufacturer's label on it from T.H.Brown and Sons. A quick search on Google revealed that T.H. Brownand sons were a well know Adelaide (South Australia) furniture maker founded in about 1910. They were important enough to be included in the SA Design Museum. Their products were available Australia wide through department stores.I think the baby chair dates from the 1940s or 50s. I haven't made a video of the process however I took a series of photographs and assembled them in Animoto. This is part one of the process stripping the paint pulling it apart and stripping the years of paint of the frame.